Forum

How to Coverstitch with a Budget Machine- Tips from the Experts

The best coverstitch machine is not always the most expensive one, and you can also coverstitch on a budget machine. Experts will recommend that you baste first to keep your fabric from twisting and slipping. They also recommend that you sew pieces together without pausing. Most coverstitch issues happen either in the beginning or the finishing stages of cover-stitching. To avoid this, layer the pieces and continue sewing. This is great for sleeve and leg hemming. Keep in mind that the best coverstitch machine will support continuous stitching.

Choose Right Needle and Sew Hems of Sleeves and Leggings on the Flat

The type of needle you choose for cover stitching will largely determine your success. You may want to go for the Schmetz ELX 705 needle, for instance. It would be best to consider sewing the hems of the sleeves and leggings on a flat plane. After hemming, you can sew the side seams together and fold in one direction before top-stitching a short row to secure the seam and keep it in place. A cheap coverstitch machine with an extended work surface area should support these procedures.

It would be best to consider pulling the upper thread to ensure proper tension on the machine. Make sure the threads are easily secured between the plates; this will make threading a lot easier. You will notice lots of resistance if your coverstitch machine is appropriately set up. The best coverstitch machine for the money offers a flexible settings adjustment for proper stitching.

Improper tension has been identified as one of the main reasons many people fail at the beginning of the use of a coverstitch. You want to achieve a consistent result consistently, hence you must adjust the tension of the thread depending on the type of fabric you are working on. Remember that more substantial tension will be needed for the more rigid fabrics and lesser tensions for the softer fabrics.

Check the Threading, and Hit the Needle Properly

The points where the needle hits the fabric can make some difference in cover-stitching. Experts recommend that you consider the edges that are covered by the seam. Sometimes, you may end up with better results if needles hit the folded fabric. For this reason, you should consider going for the best coverstitch machine with multiple needles to achieve the best result.

Checking the threading is also an essential step in optimizing the best coverstitch machine for your stitching. If everything else fails, you may want to thread the machine, and you will see how that solves most problems.

It would be best if you also learned to sew with confidence on a coverstitch machine. Some people are of the habit of constantly stopping and starting, which is not suitable for cover-stitching. The first few stitches may be slow, but you need to speed things up a little and then keep up with speed. Keeping up with a constant speed and not stopping in-between can help reduce the risks of skipped stitches and thread issues. A good coverstitch machine of variable speed control will be a great addition for coverstitching.